LA Percobaan 6






1. Prosedur [Kembali]
  • Rangkai semua komponen pada motherboard sesuai dengan percobaan pada modul 
  • Buat program untuk Raspberry Pi Pico di Thonny IDE, sesuaikan konfigurasinya dengan rangkaian yang telah dibuat dan kondisi yang dipakai pada modul
  • HUbungkan program dengan rangkaian yang telah dibuat
  • Simulasikan rangkaian

2. Hardware dan Diagram Blok[Kembali]

  • Rasberry Pi Pico

  • Potensiometer


  • Motor Servo


3. Rangkaian Simulasi dan Prinsip Kerja[Kembali]

Rangkaian Simulasi: 





Cara Kerja Rangkaian:

  1. Potensiometer digunakan sebagai input analog.

  2. Raspberry Pi Pico membaca nilai potensiometer melalui pin ADC.

  3. Nilai ADC dikonversi ke derajat (0° - 180°).

  4. Raspberry Pi Pico mengatur posisi servo motor berdasarkan derajat tersebut menggunakan sinyal PWM.

  5. Informasi sudut servo ditampilkan di LCD 16x2.

4. Flowchart dan Listing Program[Kembali] 

Flowchart:





LISTING PROGRAM :

1.main.py
from machine import Pin, ADC, PWM, I2C
from pico_i2c_lcd import I2cLcd
import utime

# 1. Setup Potensiometer (GP26 = ADC0)
pot = ADC(Pin(26))

# 2. Setup Servo (GP15)
servo = PWM(Pin(15))
servo.freq(50)  # Frekuensi PWM standar servo

# 3. Setup LCD I2C 16x2
I2C_ADDR = 0x27  # Alamat I2C LCD, bisa 0x3F tergantung modul
I2C_NUM_ROWS = 2
I2C_NUM_COLS = 16

i2c = I2C(0, sda=Pin(0), scl=Pin(1), freq=400000)  # GP0=SDA, GP1=SCL
lcd = I2cLcd(i2c, I2C_ADDR, I2C_NUM_ROWS, I2C_NUM_COLS)

# Fungsi untuk mapping nilai
def map_value(x, in_min, in_max, out_min, out_max):
    return (x - in_min) * (out_max - out_min) // (in_max - in_min) + out_min

# Kalibrasi servo
SERVO_MIN_DUTY = 1500  # Duty cycle untuk 0°
SERVO_MAX_DUTY = 7500  # Duty cycle untuk 180°

while True:
    # Baca nilai potensiometer
    pot_value = pot.read_u16()
    
    # Konversi ke sudut 0-180°
    angle = map_value(pot_value, 0, 65535, 0, 180)
    
    # Konversi sudut ke duty cycle
    duty = map_value(angle, 0, 180, SERVO_MIN_DUTY, SERVO_MAX_DUTY)
    servo.duty_u16(duty)
    
    # Tampilkan di LCD
    lcd.clear()
    lcd.putstr("Sudut Servo:")
    lcd.move_to(0, 1)
    lcd.putstr(f"{angle} derajat")
    
    utime.sleep_ms(200)  # Delay untuk mengurangi flicker

2. lcd api
# forked from https://github.com/T-622/RPI-PICO-I2C-LCD/
import time

class LcdApi:
    
    # Implements the API for talking with HD44780 compatible character LCDs.
    # This class only knows what commands to send to the LCD, and not how to get
    # them to the LCD.
    #
    # It is expected that a derived class will implement the hal_xxx functions.
    #
    # The following constant names were lifted from the avrlib lcd.h header file,
    # with bit numbers changed to bit masks.
    
    # HD44780 LCD controller command set
    LCD_CLR             = 0x01  # DB0: clear display
    LCD_HOME            = 0x02  # DB1: return to home position

    LCD_ENTRY_MODE      = 0x04  # DB2: set entry mode
    LCD_ENTRY_INC       = 0x02  # DB1: increment
    LCD_ENTRY_SHIFT     = 0x01  # DB0: shift

    LCD_ON_CTRL         = 0x08  # DB3: turn lcd/cursor on
    LCD_ON_DISPLAY      = 0x04  # DB2: turn display on
    LCD_ON_CURSOR       = 0x02  # DB1: turn cursor on
    LCD_ON_BLINK        = 0x01  # DB0: blinking cursor

    LCD_MOVE            = 0x10  # DB4: move cursor/display
    LCD_MOVE_DISP       = 0x08  # DB3: move display (0-> move cursor)
    LCD_MOVE_RIGHT      = 0x04  # DB2: move right (0-> left)

    LCD_FUNCTION        = 0x20  # DB5: function set
    LCD_FUNCTION_8BIT   = 0x10  # DB4: set 8BIT mode (0->4BIT mode)
    LCD_FUNCTION_2LINES = 0x08  # DB3: two lines (0->one line)
    LCD_FUNCTION_10DOTS = 0x04  # DB2: 5x10 font (0->5x7 font)
    LCD_FUNCTION_RESET  = 0x30  # See "Initializing by Instruction" section

    LCD_CGRAM           = 0x40  # DB6: set CG RAM address
    LCD_DDRAM           = 0x80  # DB7: set DD RAM address

    LCD_RS_CMD          = 0
    LCD_RS_DATA         = 1

    LCD_RW_WRITE        = 0
    LCD_RW_READ         = 1

    def _init_(self, num_lines, num_columns):
        self.num_lines = num_lines
        if self.num_lines > 4:
            self.num_lines = 4
        self.num_columns = num_columns
        if self.num_columns > 40:
            self.num_columns = 40
        self.cursor_x = 0
        self.cursor_y = 0
        self.implied_newline = False
        self.backlight = True
        self.display_off()
        self.backlight_on()
        self.clear()
        self.hal_write_command(self.LCD_ENTRY_MODE | self.LCD_ENTRY_INC)
        self.hide_cursor()
        self.display_on()

    def clear(self):
        # Clears the LCD display and moves the cursor to the top left corner
        self.hal_write_command(self.LCD_CLR)
        self.hal_write_command(self.LCD_HOME)
        self.cursor_x = 0
        self.cursor_y = 0

    def show_cursor(self):
        # Causes the cursor to be made visible
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR)

    def hide_cursor(self):
        # Causes the cursor to be hidden
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)

    def blink_cursor_on(self):
        # Turns on the cursor, and makes it blink
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR | self.LCD_ON_BLINK)

    def blink_cursor_off(self):
        # Turns on the cursor, and makes it no blink (i.e. be solid)
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR)

    def display_on(self):
        # Turns on (i.e. unblanks) the LCD
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)

    def display_off(self):
        # Turns off (i.e. blanks) the LCD
        self.hal_write_command(self.LCD_ON_CTRL)

    def backlight_on(self):
        # Turns the backlight on.
        
        # This isn't really an LCD command, but some modules have backlight
        # controls, so this allows the hal to pass through the command.
        self.backlight = True
        self.hal_backlight_on()

    def backlight_off(self):
        # Turns the backlight off.

        # This isn't really an LCD command, but some modules have backlight
        # controls, so this allows the hal to pass through the command.
        self.backlight = False
        self.hal_backlight_off()

    def move_to(self, cursor_x, cursor_y):
        # Moves the cursor position to the indicated position. The cursor
        # position is zero based (i.e. cursor_x == 0 indicates first column).
        self.cursor_x = cursor_x
        self.cursor_y = cursor_y
        addr = cursor_x & 0x3f
        if cursor_y & 1:
            addr += 0x40    # Lines 1 & 3 add 0x40
        if cursor_y & 2:    # Lines 2 & 3 add number of columns
            addr += self.num_columns
        self.hal_write_command(self.LCD_DDRAM | addr)

    def putchar(self, char):
        # Writes the indicated character to the LCD at the current cursor
        # position, and advances the cursor by one position.
        if char == '\n':
            if self.implied_newline:
                # self.implied_newline means we advanced due to a wraparound,
                # so if we get a newline right after that we ignore it.
                pass
            else:
                self.cursor_x = self.num_columns
        else:
            self.hal_write_data(ord(char))
            self.cursor_x += 1
        if self.cursor_x >= self.num_columns:
            self.cursor_x = 0
            self.cursor_y += 1
            self.implied_newline = (char != '\n')
        if self.cursor_y >= self.num_lines:
            self.cursor_y = 0
        self.move_to(self.cursor_x, self.cursor_y)

    def putstr(self, string):
        # Write the indicated string to the LCD at the current cursor
        # position and advances the cursor position appropriately.
        for char in string:
            self.putchar(char)

    def custom_char(self, location, charmap):
        # Write a character to one of the 8 CGRAM locations, available
        # as chr(0) through chr(7).
        location &= 0x7
        self.hal_write_command(self.LCD_CGRAM | (location << 3))
        self.hal_sleep_us(40)
        for i in range(8):
            self.hal_write_data(charmap[i])
            self.hal_sleep_us(40)
        self.move_to(self.cursor_x, self.cursor_y)

    def hal_backlight_on(self):
        # Allows the hal layer to turn the backlight on.
        # If desired, a derived HAL class will implement this function.
        pass

    def hal_backlight_off(self):
        # Allows the hal layer to turn the backlight off.
        # If desired, a derived HAL class will implement this function.
        pass

    def hal_write_command(self, cmd):
        # Write a command to the LCD.
        # It is expected that a derived HAL class will implement this function.
        raise NotImplementedError

    def hal_write_data(self, data):
        # Write data to the LCD.
        # It is expected that a derived HAL class will implement this function.
        raise NotImplementedError

    def hal_sleep_us(self, usecs):
        # Sleep for some time (given in microseconds)
        time.sleep_us(usecs)

3.Pi pico I2C LCD
# forked from https://github.com/T-622/RPI-PICO-I2C-LCD/
import utime
import gc

from lcd_api import LcdApi
from machine import I2C

# PCF8574 pin definitions
MASK_RS = 0x01       # P0
MASK_RW = 0x02       # P1
MASK_E  = 0x04       # P2

SHIFT_BACKLIGHT = 3  # P3
SHIFT_DATA      = 4  # P4-P7

class I2cLcd(LcdApi):
    
    #Implements a HD44780 character LCD connected via PCF8574 on I2C

    def _init_(self, i2c, i2c_addr, num_lines, num_columns):
        self.i2c = i2c
        self.i2c_addr = i2c_addr
        self.i2c.writeto(self.i2c_addr, bytes([0]))
        utime.sleep_ms(20)   # Allow LCD time to powerup
        # Send reset 3 times
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(5)    # Need to delay at least 4.1 msec
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(1)
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(1)
        # Put LCD into 4-bit mode
        self.hal_write_init_nibble(self.LCD_FUNCTION)
        utime.sleep_ms(1)
        LcdApi._init_(self, num_lines, num_columns)
        cmd = self.LCD_FUNCTION
        if num_lines > 1:
            cmd |= self.LCD_FUNCTION_2LINES
        self.hal_write_command(cmd)
        gc.collect()

    def hal_write_init_nibble(self, nibble):
        # Writes an initialization nibble to the LCD.
        # This particular function is only used during initialization.
        byte = ((nibble >> 4) & 0x0f) << SHIFT_DATA
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        gc.collect()
        
    def hal_backlight_on(self):
        # Allows the hal layer to turn the backlight on
        self.i2c.writeto(self.i2c_addr, bytes([1 << SHIFT_BACKLIGHT]))
        gc.collect()
        
    def hal_backlight_off(self):
        #Allows the hal layer to turn the backlight off
        self.i2c.writeto(self.i2c_addr, bytes([0]))
        gc.collect()
        
    def hal_write_command(self, cmd):
        # Write a command to the LCD. Data is latched on the falling edge of E.
        byte = ((self.backlight << SHIFT_BACKLIGHT) |
                (((cmd >> 4) & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        byte = ((self.backlight << SHIFT_BACKLIGHT) |
                ((cmd & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        if cmd <= 3:
            # The home and clear commands require a worst case delay of 4.1 msec
            utime.sleep_ms(5)
        gc.collect()

    def hal_write_data(self, data):
        # Write data to the LCD. Data is latched on the falling edge of E.
        byte = (MASK_RS |
                (self.backlight << SHIFT_BACKLIGHT) |
                (((data >> 4) & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        byte = (MASK_RS |
                (self.backlight << SHIFT_BACKLIGHT) |
                ((data & 0x0f) << SHIFT_DATA))      
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        gc.collect()

5. Kondisi[Kembali]
Buatlah Rangkaian seperti gambar percobaan 6

6. Video Simulasi[Kembali]


7. Download File[Kembali]

Download Project Klik Disini
Download Video Klik Disini
Datasheet Raspberry Pi Pico [Download]
Datasheet Resistor [Download]
Datasheet LED [Download]

Komentar

Posting Komentar

Postingan populer dari blog ini

Gambar
Kamis, 23 Februari 2023 BAHAN PRESENTASI MATA KULIAH ELEKTRONIKA 2023                                  OLEH MUHAMMAD NAGOYA ALSHABARU RIADY 2210953014 DOSEN PENGAMPU DR. DARWISON, M.T. Referensi  1. Darwison, 2010, ”TEORI, SIMULASI DAN APLIKASI ELEKTRONIKA ”, Jilid 1, ISBN: 978-602-9081-10-7, CV Ferila, Padang 2. Darwison, 2010, ”TEORI, SIMULASI DAN APLIKASI ELEKTRONIKA ”,Jilid 2,  ISBN: 978-602-9081-10-8, CV Ferila, Padang 3. Robert L. Boylestad and Louis Nashelsky, Electronic Devices and Circuit Theory, Pearson, 2013 4. Jimmie J. Cathey, Theory and Problems of Electronic Device and Circuit, McGraw Hill, 2002. 5. Keith Brindley, Starting Electronics, Newness 3rd Edition, 2005 6. Ian R. Sinclair and John Dunton, Practical Electronics Handbook, Newness, 2007. 7. John M. Hughes, Practical Electronics: Components and Techniques, O’Reilly Media, 2016. JURUSAN TEKNIK ELEKTRO FAKULTAS TEKNIK UNIVERS...
Baca selengkapnya

Tugas Besar (Parkir Otomatis)

Gambar
Tugas Besar : Kontrol Tempat Parkir Otomatis Kontrol Tempat Parkir Otomatis dengan menggunakan Sound sensor, Infrared sensor,PIR sensor,Magnetic sensor, UV Sensor dan Touchpad. MENU SEBELUMNYA DAFTAR ISI 1. Tujuan 2. Alat dan Bahan 3. Dasar Teori 4. Percobaan 5. Video Percobaan dan Gambar Rangkaian 6. Link Download 1. Tujuan   [Daftar] Dapat memahami sistem rangkaian aplikasi parkir otomatis menggunakan sensor infrared, sensor touch, dan sound sensor dan sensir magnet. Mengaplikasikan rangkaian aplikasi parkir otomatis kedalam software proteus Untuk dapat mengetahui penggunaan aplikasi parkir otomatis Untuk dapat lebih memahami karakteristik parkir otomatis Untuk menyelesaikan tugas besar yang diberikan Bapak Dr. Darwison. 2. Alat dan Bahan   [Daftar] Alat 1) Baterai     Baterai  adalah perangkat yang terdiri dari satu atau lebih sel elektrokimia dengan koneksi eksternal yang disediakan untuk memberi daya  pada  perangkat listrik seperti sen...
Baca selengkapnya